2017 Star SR 38B

Control: Fanuc 31-B5 12′ Edge Patriot 551 Bar Feed LNS Chip Conveyor Long Parts Ejection Short Parts Ejection Magic Guide Bushing High Pressure Coolant (Oil) Fire Suppression System Mist Blaster Chiller Number of Axes: 10 Main Spindle: C1/Z1 ( Headstock) Main Spindle: X1/ X3/Y1/B1 Axis ( Platen) Max. Machining Diameter: 38mm (Swiss Type) / 42mm…

Continue Reading

2019 HAAS ST 25

APL 10-25 Automatic Parts Loader Chip Conveyor Auto Jet Air Blast X Axis: 213mm Z Axis: 572mm High Pressure Coolant System: 300 PSI 12 Station Bolt on Tool Turret: 25mm Turning Sticks Chuck: 10″ Hydraulic Chuck A2-6 Spindle Nose Automatic Tool Presetter: Manual and Automatic Modes Specs to be verified by purchaser Contact us for…

Continue Reading

2010 HAAS Mini Mill

Table/ Pallet Size: 40″x 14″ High Pressure Coolant IPF Rigid Tap X Travel: 20″ Y Travel: 16″ Z Travel: 14″ Rapid Traverse: 1200IPM Cutting Feed Rate: 833IPM Spindle Taper Type: CAT #40 Spindle Speed: 7,500RPM Spindle Motor: 7.5HP Tool Changer Capacity: 24.1 Tool Changer Type: Side Mount Tool Change Time: 3.5 sec. Chip to Chip…

Continue Reading

2000 OKK MVC1060

Control: Fanuc 16i Table Size: 98.4″ x 41.7″ X Axis: 84.25″ Y Axis: 41.7″ Z Axis: 31.49″ CAT 50 ATC: 40 Spindle Speed: 13,000rpm Specs to be verified by purchaser Contact us for more information at Dan 815-236-1069 dan@wwechicago.com

2006 Doosan Puma 240MSB

Fanuc 18i Control Chip Conveyor Parts Conveyor 2 ID Holders 2 Double Turning Holders No Live Tools Machine Has Live Tool Option Swing Over Bed: 550mm Swing Over Saddle: 390mm Max. Turning Diameter: 300mm Max. Turning Length: 513mm Bar Working Diameter: 65mm X Axis Travel: 205mm Z Axis Travel: 580mm B Axis Travel: 580mm Main…

Continue Reading

2007 Tsugami BU20

LNS Hydro Bar Bar Feed Control: Fanuc 16iTB High Pressure Mist Collection Parts Conveyor Axis: 9 Spindle Hole Diameter: 0.7874″ RPM: 8,000 rpm Turret Tooling (2 )Power Tools (3 ) Turning Tools (6) Sleeve Holders Specs to be verified by purchaser Contact us for more information at Dan 815-236-1069 dan@wwechicago.com

2006 Mori Seiki NL2000Y/500

4 Live Tools 2 Jaw Chuck / 3 Jaw Chuck Chip Conveyor High Pressure Max. Swing Over Bed: 29.72″ Max. Turning Diameter: 14″ Max. Machining Length: 20″ X-Axis Travel: 10.2″ Y-Axis Travel: 3.9″ Z- Axis Travel: 23.2″ Bar Capacity: 2.5″ Spindle Bore: 2.9″ Spindle Nose: A2-6 Spindle Speed: 50-5,000RPM Spindle Motor: 20HP Milling Speed :…

Continue Reading

2006 Cubic Diamond 32CSL

Control: Mitsubishi Bar Feed Parts Conveyor Chip Conveyor Chip Cart High Pressure Coolant Specs to be verified by purchaser Contact us for more information at: Dan 815-236-1069 dan@wwechicago.com

2011 Tsugami BE-12V

Ie Iemca Elite 112 Bar Feed Control: Fanuc 31i-A 2000 PSI HP Pump Mist Collector Fire Suppression Spindle Hole Diameter: 0.5″ RPM: 12,000 rpm Axis: 5 Specs to be verified by purchaser Contact us for more information at Dan 815-236-1069 dan@wwechicago.com

2008 Tsugami SS32

Control: Fanuc 32i-B MTA Tracer 32 Bar Feed MP Eight Line High Pressure Fire Suppression Mist Collector Max. Bar Stock: 32mm Number of Axes: 6 Sliding Headstock / Guide Bushing : Yes Max. Headstock Stroke With Guide Bushing: 320mm Number of Tool Positions ( Standard/ Max) : 24/40 Live Tool Positions ( Standard / Max):…

Continue Reading

2000 Citizen M20

Mitsubishi Control Iemca Mini Boss 332 Bar Feed 8 Line Cool Blaster Max. Bar Diameter: 20mm Spindle Rotation Speed: 200-8100 rpm Spindle Power: 3,7 KW C Axis on Main Spindle and Sub Spindle Number of Tools on Main Spindle: 8 ( 3 Motorized) Driven Tools Rotation Speed: 5,000 rpm Turret: 10 Positions Sub Spindle Max….

Continue Reading

2002 Citizen M32

Iemca Mini Boss 332 Bar Feed Mitsubishi Meldas 635L Control Chip Conveyor Parts Catcher 3 Static Turret Tool Holders 1 Live Turret Tool Holder 8 Line Cool Blaster High Pressure Mist Collector 9 Bar Loader Collets : 7/16 -1-3/16″ Max. Bar Diameter: 32mm Max. Machining Length: 320mm Rotation Speed: 10,000rpm Sub Spindle Speed: 8,000 rpm…

Continue Reading

2000 Citizen L32

Iemca Boss 432 Bar Feed High Pressure Tri Mist 850 Control: Mitsubishi Sliding Headstock Bar Capacity: 32mm Main Spindle Speed: 8000 rpm Sub Spindle Speed: 6000 rpm 6 Axis Machine: X1, Z1, Y1, C1, X2, Z2 Contact us for more information at Dan 815-236-1069 dan@wwechicago.com

2013 Fanuc Robo Drill D14SiA5

Table Size: 25.6″ x 15.7″ Max. Table Load: 660lbs X Axis Travel: 11.8″ Y Axis Travel: 11.8″ Z Axis Travel: 13″ Spindle Nose To Table Top: 5.9″ – 18.9″ Spindle Taper: Big Plus BT30 Spindle Speed: 24,000RPM Spindle Motor: 34.8 / 7.3 HP Rapid Travers Rates: 2,125 IPM Cutting Feed Rates: 1,181 IPM Tool Stations:…

Continue Reading

2004 Brother TC-R2A

X Axis Travel: 16.5″ Y Axis Travel: 12.6″ Z Axis Travel: 10.6″ Table Size: 19.7″ x 11.8″ Max. Spindle Speed: 10,000 rpm Spindle Taper: BT-30 Table Top To Spindle Nose: 7.1″ – 17.1″ Rapid Traverse Rate: X: 1181 IPM Y: 1181 IPM Z: 1965 IPM Number Of Tool Stations: 14 Specs to be verified by…

Continue Reading

2014 Hyundai WIA E160A

Max. Turning Diameter: 11″ Max. Turning Diameter: 11.8″ Chuck Size: 6″ Driving Method: Belt Spindle RPM: 6,000rpm Spindle Torque: 26.4 /51.6 Travel X : 6.5″ Travel Z: 13″ Rapid Travel ( X/Z) : 30/30 Number of Tools: 12 Tool Size: 0.8 / 1.3 Specs to be verified by purchaser Contact us for more information at…

Continue Reading

2014 Fanuc Robodrill D14MIA5

Table Size: 25.6″ X 15.7″ Load Capacity: 660lbs X Axis Travel: 19.7″ Y Axis Travel: 15.7″ Z Axis Travel: 13″ Spindle To Table: 18.9″ Spindle Speed: 10,000rpm Spindle Taper: BT-30 Spindle Power: 14.75hp X Axis Rapid Traverse: 2,125 IPM Y Axis Rapid Traverse: 2,125 IPM Z Axis Rapid Traverse: 1,181 IPM ACT Type: 14 Station…

Continue Reading

2004 Tsugami BOO7-II

Spego Bar Feed Control: Fanuc Mist Collector High Pressure Coolant Parts Conveyor 1 Degree Index Main Spindle : 15,000rpm 2 Power Tools Sub Spindle: 12,000rpm 3 Front Working Tools ( Static) 3 Back Working Tools ( Static) 6 Turning Tools Specs to be verified by purchaser Contact us for more information at Dan 815-236-1069 dan@wwechicago.com

2005 Okuma LB300C

Control: OSP-100 Chuck Size: 10″ Hydraulic Swing Over Bed: 20.87″ Swing Over Saddle: 16.14″ Max. Turning Diameter: 14.56″ Max. Work Length: 39.37″ X Axis Travel: 10.23″ Z Axis Travel: 40.16″ Spindle Speed: 45-4500 RPM Turret Type: 12 Station Turret Rapid Traverse Rates: X/Z 787IPM / 984IPM Tailstock Quill Type/ Quill Travel: MT #5/ 4.72″ Cutting…

Continue Reading

2002 Miyano BNE51S

Iemca TAL 65/38 Bar Feed Control: Fanuc 18-T X Axis Travel (Upper/ Lower): 5.9″ / 4.5″ Z Axis Travel (Upper/ Lower): 14.96″ / 4.9″ Max. Bar Capacity: 2″ Max. Swing ( Upper/ Lower): 20″ / 17.9″ Max. Turning Diameter: 6″ Max. Turning Length: 3.54″ Spindle Motor: 20HP Main Spindle Speed: 50-4,000 rpm Sub Spindle Speed:…

Continue Reading

What was the problem? Both Cialis and Viagra are medicines that simply called phosphodiesterase type 5 inhibitor or contain generic tadalafil 20mg 1. Medications for hypertension. Also referred to cheap online cialis A stretch removers purpose would be to have a direct purchase cialis online Medical help is a demand that is main cheapest cialis Celtrixa is a merchandise which is made to address the cialis 20mg Among the most widely used remedies for impotence that is sexual buy online cialis Kegels are workouts that are ideal for increasing ejaculatory control in men. You can be helped by buy viagra cialis ED was seen as a person s worst cialis online order There are various other exercises that while additionally buy generic cialis Several years ago, community dialogue of a buy cialis 60mg
1 2 3